Automated Short Time Thermal High Current Test Equipment AC380V 45Hz - 65Hz
1 Summary
Automated short-time thermal test set can be applied to conduct high thermal current test for CT, circuit breaker and other primary equipment of power system.
2 Product Characteristics
The Product has following obvious advantages as compared with existing short-time thermal testers:
1 As compared with the test system in LCR charging and discharging mode, volume and weight of the Device, as well as cost, have been reduced significantly.
2 The device measures impedance of primary sample circuit, and automatically controls its output current to target current based on measurements.
3 When the required test output capacity exceed maximum output of the device, I2t equivalent test method is applied automatically to make the test feasible.
4 The test is fully automated, the control circuit of device monitors all signals of test circuit such as primary current, primary voltage, voltage and current of internal variable transformer and system line voltage.
5 The test process is simple and quick, and values and time curves of various signals during test, including electricity of sample primary circuit, voltage of primary circuit and output voltage of device voltage variable transformer are recorded and stored.
3 Functions
1 Measure impedance of primary sample circuit of connected current transformer, adjust variable transformer of device to target value based on measured impedance value, then generate required target test current in the output circuit of heat flow device.
2 Record amplitude-time curves during test, including current of sample primary circuit, voltage of primary circuit and output voltage and output current of device variable transformer.
3 Automatically control and monitor the overall test process, and protect abnormalities and wrong operations during testing.
4 Generate the well-formed test report.
4 Technical Indicators
1 Maximum output current: 0~25000A (greater output current is customizable), output current error is less than 10% of set value
2 Output capacity: 250KVA (Customizable)
3 Current of sample primary circuit: 0~25000A, with measurement error of 0.1%FS
4 Voltage of primary sample circuit: 0~10V, with measurement error of 0.1%FS
5 Voltage and current waveform sampling rate during test: 25 KHz, with time measurement error of 0.04ms
7 Power supply: AC380V 45Hz~65Hz
8 Operating temperature: 0~50 degrees, hsumidity is less than 90%
Control Box of CT Short-Time Thermal Current Tester
High Current Booster
Product Tags:
|
|
Automated Short Time Thermal High Current Test Equipment AC380V 45Hz - 65Hz Images
|
